[. . . ] With the VESA Mount Adapter installed, you can use your 24-inch iMac with a variety of VESA-compliant mounting solutions, such as articulating arms or wall mounts. Use the adapter only with a VESA mount that can support the weight of your 24-inch iMac. [. . . ] The access card should go into the space at a slight upward angle for about 3/4 of an inch. Important: Use only the access card provided with the kit for this step. Use of any other object or instrument could result in personal injury, and damage to your iMac. 4 Rotate your iMac forward another 10 degrees until the 8 screws on top of the stand are visible and the stand is locked in place. 5 Hold the sides of your iMac and carefully lay it down so that the screen is resting on a soft towel or cloth on a flat surface and the stand hangs over the edge of your work surface. 6 Use the TORX tool to remove the 8 screws that attach the stand to the back of your iMac. You'll need these screws to attach the flange to your iMac, so set them aside. 7 Remove the stand and put it in a safe place in case you want to reattach it. 8 Align the hole in the flange with the pin on the back of your iMac, and then use the TORX tool and the 8 screws you removed from the stand to attach the flange. Important: Keep the flange in the locked position while you attach the mount adapter. [. . . ] 5 Tenez l'iMac par les côtés et posez-le doucement à plat de manière que l'écran repose sur une serviette ou un tissu doux sur une surface plane, et que le support soit suspendu au-dessus du bord de votre surface de travail. Other company and product names mentioned herein are trademarks of their respective companies. [. . . ]